ADHESIVO EX-PS

Contact adhesive for bonding expanded polystyrene (EPS) without damaging it. Spatula application.

ADHESIVO TL/NS

Non-staining contact adhesive with excellent resistance to yellowing for general-purpose applications, especially for lampshade assembly.

AQUATACK 100-BV

Water based contact adhesive high speed of coagulation by pressure. Application by brush or roller.

AQUATACK 4333PT/BV

Water based polyurethane adhesive for spray application. One or two component adhesive for bonding by heat reactivation.

AQUATACK S-1K/1068BV

One component water based adhesive for the bonding of polyurethane foam materials to itself and to wood, metal, textile etc. on upholstery and mattress. Application by spray or roller. Substitute in many cases for solvent based spray adhesives.

AQUATACK S-2K/9000

Two component water based adhesive for the bonding of polyurethane foam materials to itself and to wood, metal, textile etc. on upholstery and mattress. No flammable and No toxic.

CEBEROL

400 ml aerosol contact adhesive for applications similar to those of SPRAY TR-85.

CELLOPRENE P-2774

Sprayable contact adhesive for applications requiring a general-purpose contact adhesive with good TACK and a long open time, while providing higher heat resistance than conventional SPRAY adhesives.

CELLOPRENE P-3571

Single-component sprayable adhesive for demanding bonding applications, offering high heat resistance.

CELLOPRENE P-7000

Single-component sprayable adhesive for general-purpose applications, offering good heat resistance.

DESMOLDEANTE PUV

Solvent-based release agent for the demoulding of viscoelastic polyurethane materials, such as memory foam pillows. Provides excellent performance throughout the demoulding cycle.

DISOLVENTE N

Solvent for cleaning machines, spray guns, brushes, etc., and for thinning synthetic rubber and polychloroprene adhesives.

DISOLVENTE NI-3

NON-FLAMMABLE solvent for cleaning machines, spray guns, brushes, etc., and for thinning synthetic rubber and polychloroprene adhesives.

MONTAROL 260 F/NS

Low-staining solvent-based adhesive for brush application, offering high TACK and a long open time. Single-component. Suitable for medium-demand bonding applications.

MONTAROL 260 ST

Brush-applied adhesive with good TACK and fast bonding. Suitable for medium- to high-demand bonding applications.

SPRAY 92 TACK

Single-sided adhesive with very high TACK and very fast bonding, designed for applications where adhesive is applied to only one of the two surfaces to be bonded, on flat parts not subjected to significant stress, especially at elevated temperatures.

SPRAY ISOPLUS

Spray-applied adhesive developed for the upholstery industry and general-purpose applications requiring a high-solids adhesive with good heat resistance and improved adhesion to plastics and other difficult-to-bond materials. Lower TACK than our SPRAY adhesive range.

SPRAY NI ESPECIAL

NON-FLAMMABLE adhesive for bonding polyurethane foam to itself and to wood, metal, textiles, etc. Two-sided application, excellent sprayability, very fast drying, high TACK, good heat resistance, long open time and rapid development of bond strength.

SPRAY NI-100

NON-FLAMMABLE adhesive for upholstery and mattress manufacturing, formulated with the highest possible solids content and enhanced heat resistance while maintaining excellent TACK.

SPRAY S-3

Adhesive for application to one or both bonding surfaces. Meets the requirements for automotive seat manufacturing, offering heat resistance up to 60–80°C, depending on the applied load.

SPRAY TR-85

Adhesive for bonding foam materials to themselves and to wood, metal, textiles, etc. Two-sided application, very fast drying, excellent sprayability, high TACK, good heat resistance, long open time and rapid development of bond strength.

SPRAY TR-86

Winter version of our SPRAY TR-85, with higher tack and improved resistance to blooming for use in high-humidity and cold environments.