|AQUAFLOOR||Water based primer formulated with acrylic resins designed to give the surfaces a waterproofing layer with a good hardness, resistance against abrasion, UV radiation and environmental humidity.|
|AQUATACK BC||Adhesivo para la captura de insectos. Alto nivel de tack y pegajosidad los cuales se mantienen durante largos periodos de tiempo.|
|AQUATACK TUBELESS||Anti-puncture sealant for TUBELESS systems. Free of Ammonia.|
|HIDROFUGANTE H-1||Clear colour solution of a preparation destined to the treatment of porous surfaces, giving them the power to be repellent against the water, so it avoids the absorbing of the same.|
|INSOPAINT MATE EXTRA||Plastic painting dull vinílica for ended of high quality. Of extraordinary whiteness and high performance. Exterior and interior use.|
|LIMPIADOR CEMENTO||Cleaner based on organic salts to eliminate splashes and residues of concrete. NOT corrosive to the skin or most metals.|
|TYROCOL AGLOMERANTE AM/I||One component resin system created as binder for stones, recycled plastics, vegetal peels, etc. getting a decorative wide variety to embellish pots, roundabouts and any other spaces the aesthetic of which we might want to enhance by using such ornaments. Mix on a kneading machine.|
|TYROCOL AGLOMERANTE RE/I||Same as AGLOMERANTE AM/I but spray gun application.|
|TYROCOL AL-8||Adhesive paste based on acrylic dispersions of unilateral application specially indicated for plaster of ceramics on any support, specially on wood and deformable supports. Good water resistance.|
|TYROCOL LIGANTE MORTERO||Emulsion made of synthetic resins that added to the mixing water in mortars and concretes increases its chemical and mechanical resistance.|
|TYROCOL PUENTE||Acrylic primer developed to improve the adhesion between cement based mortars and plasters with high solid content.|
|TYROCOL PUENTE/CS||Petreus and no tack version of TYROCOL PUENTE.|
|TYROCOL PUENTE/V||High tack and high viscosity version of TYROCOL PUENTE.|
|TYROCOL RE/G||Adhesive paste type mortar one cap from application to pistol For his elasticity and excellent resistance to the water is adapted to cover fronts of ended in board or wood.|
|TYROCOL RL||Adhesive paste type mortar one cap for elastic coating. Application by spatula or llana. Due to his elasticity and excellent resistance to the water is adapted to cover fronts of ended in board or wood.|
|TYROCOL RL-2||Similar to TYROCOL RL but with a petrous appearance.|
|TYROCOL S-1||Non Flammable one way adhesive for PVC floor bonding, linoleum, foam, carpets or cork over concrete, wood, etc.|
|AQUATACK 100||Water based contact adhesive high speed of coagulation by pressure for leather goods, wallets, etc. and for auxiliary works as lining, folding, lasting before sewing or bonding insoles. Application by brush or roller.|
|AQUATACK 1K / 891||Polyurethane water dispersion based ONE COMPONENT adhesive. Recommended for the most common sole materials (PUR, PVC, Rubber, Leather, TR, Cork/Latex BIOS) to synthetic or natural uppers as well as for lamination of these materials. Spray application.|
|AQUATACK 200 SR-7||Modified natural latex for combining and other hand-made auxiliary works in shoemaking, for the production of insoles. High tack and long open time. Soft and flexible adhesive joints. Sprayable. Contact bonding.|
|AQUATACK 200 SR-7/V-UV||Sprayable high viscosity version of AQUATACK 200 SR-7 for porous substrates with UV tracer.|
|AQUATACK 200 SR/5||Modified natural latex for combining and other hand-made auxiliary works in shoemaking, for the production of insoles. Very high tack and long open time. Soft and flexible adhesive joints. Sprayable. Contact bonding.|
|AQUATACK 200 SR/75||Version of AQUATACK 200 SR-7 with better resistance to temperature for substrates which are going to be dry by oven.|
|AQUATACK 2000/CB||Sprayable water based COLD BONDING polyurethane adhesive designed for synthetic materials (e.g. PVC, PU), leather goods, wallets, etc. and for auxiliary works as lining, folding, lasting before sewing or bonding insoles.|
|AQUATACK 225||Modified natural latex with a better initial strength and faster crystallization than other of the same family AQUATACK 200SR. Sprayable. Contact bonding.|
|AQUATACK 240-V||Modified natural latex for combining and other hand-made auxiliary works in shoemaking, for the production of insoles. High tack and long open time. Soft and flexible adhesive joints. Adequate viscosity to apply by roll or spray gun. Contact bonding.|
|AQUATACK 300 SL-2||Version of AQUATACK 300SR/ECO with low tack but better resistance to temperature.|
|AQUATACK 300 SR-ECO||Based on synthetic latex. Sprayable. General purpose contact bonding water-based adhesive for auxiliary works (combining, lining, folding, etc.) in shoemaking and leather goods industries, with natural and synthetic materials.|
|AQUATACK 350-S||Version of AQUATACK 300SR/ECO with low tack but better sprayability.|
|AQUATACK 3835/UV||Water based polyurethane adhesive for bonding of leather and synthetic upper materials to leather, PVC, PUR, vulcanized rubber and TR soles, with the suitable previous treatment. Two components. Application by roll or brush.|
|AQUATACK 400 VISCOSO||Based on synthetic latex. General use for the bonding of porous materials in lasting, combining, folding, insole bonding, etc. High viscosity with good brushability. Good tack and 30 minutes open time for contact bonding.|
|AQUATACK 4000||Water based polyurethane adhesive for bonding Pu foams to upper materials by heat reactivation by iron press to made insoles.|
|AQUATACK 405||Based on synthetic latex. Sprayable. General purpose contact bonding water-based adhesive for auxiliary works (combining, lining, folding, etc.) in shoemaking and leather goods industries, with natural and synthetic materials.|
|AQUATACK 4333/PT||Polyurethane water base adhesive, similar to AQUATACK 3835/UV but use for bonding of cork/latex (Bios) insoles by spray application, with better hot-tack and lower activation temperature.|
|AQUATACK 450-S||Based on synthetic latex. Medium viscosity with good sprayability. Low tack and good heat resistance for fast and strong contact bonding.|
|AQUATACK 5000/UV||Similar to AQUATACK 4333-PT but with better initial strength and high brightness on BIOS applications.|
|AQUATACK 6000||Similar to AQUATACK 5000/UV but with very high initial strength and short open time.|
|AQUATACK L-300 MD||For lining uppers, laminating, folding, etc., with natural materials. Sprayable or roll machine. Wet bonding, short open time. Soft and flexible adhesive joints.|
|AQUATACK L-300 MDE/2||Similar to AQUATACK L-300 MD, but with higher viscosity. Brushable and roll machine.|
|AQUATACK PRIMER EVA-301/UV||Water based Primer for MP-EVA when these are posteriorly bonded with PU water based adhesives, with heat activation at 80-90ºC.|
|AQUATACK 100-BV||Water based contact adhesive high speed of coagulation by pressure. Application by brush or roller.|
|AQUATACK 4333-PT||Polyurethane water base adhesive, similar to AQUATACK 3835/UV but use for bonding of cork/latex ( Bios ) insoles by spray application, with better hot-tack and lower activation temperature.|
|AQUATACK S-1K/1068BV||One component water based adhesive for the bonding of polyurethane foam materials to itself and to wood, metal, textile etc. on upholstery and mattress. No flammable and No toxic.|
|TYROCOL A-6/F||Water based sprayable high tack adhesive for paper, cardboard or synthetics to wood, galvanized sheet, ceramics, leather, etc.|
|TYROCOL C-10||Special glue for plastics laminating.|
|TYROCOL C-10/FP||Withe glue for paper, cardboard to PE, PP or PVC plastics sheets. The dry film is flexible.|
Withe glue for paper, cartoon. The dry film is flexible.
In graphic arts for loins books.
|TYROCOL C-31||Standard water based adhesive for roller application to made cardboard boxes.|
|TYROCOL C-50||Special glue for photo books. Plastic laminating in screens lamps.|
|AQUATACK 1K-891||One component water based PU-adhesive especially for bonding of PVC foils with a excellent thermoreactivity. Specially indicated for wrapping of MDF with PVC foil with membrane or vacuum pressing. Gun application.|
|AQUATACK 4024||Water based PU-adhesive especially for bonding of PVC foils with a excellent thermoreactivity. Applied with Reticulante DA is specially indicated for wrapping of MDF with PVC foil with membrane or vacuum pressing. Gun application.|
|TYROCOL AF||High frequency bonding. Very fast adhesive for application by high frequency.|
|TYROCOL CLV||Special for spike of wood. Used in automatic machinery.|
|TYROCOL IG 3||Laminating, covering, assembling. Humidity resistance EN 204 D 3 with catalyst. En 204 D 4.|
|TYROCOL P-10||For assembling laminating and filling up. High viscosity and fast setting time.|
|TYROCOL P-10R||Very fast assembling and laminating adhesive. Very fast setting time.|
|TYROCOL P-20||Universal adhesive for all types of wood-working uses. Medium open time and fast setting time.|
Withe glue special for chairs and hard woods. Lightly flexible film.
Fast setting time.
Universal white glue, for all types of wood-working uses.
Economic adhesive. Large open time.
|TYROCOL PB||Adhesive special for metal-wood in the production of security doors.|
|TYROCOL PS-400||Specific adhesive for structural assembling upholstery.|
El proyecto de la actuación I+D PYME (PIDI-CV) realizado por INSOCO, S.L.:
INVESTIGACIÓN Y DESARROLLO DE UN NUEVO ADHESIVO CONDUCTIVO ELECTROSTÁTICO EN BASE AGUA (Nº Expediente: IMIDTA/2019/76)
Ha sido cofinanciado gracias al apoyo económico de IVACE y de la Unión Europea:
Apoyo financiero de IVACE, a través del Programa PROYECTOS DE I+D DE PYME (PIDI-CV).
Esta subvención cuenta con financiación del Fondo Europeo de Desarrollo Regional (FEDER) en un porcentaje del 50% a través del Programa Operativo FEDER de la Comunitat Valenciana 2014-2020.
INSOCO, S.L. ha obtenido una resolución favorable en la convocatoria “AYUDAS EN MATERIA DE INDUSTRIALIZACIÓN PARA INVERSIONES DE PYMES INDUSTRIALES QUE MEJOREN LA COMPETITIVIDAD Y SOSTENIBILIDAD DE LOS SECTORES DEL CALZADO, CERÁMICO, METAL-MECÁNICO, TEXTIL, JUGUETE, MÁRMOL, MADERA-MUEBLE E ILUMINACIÓN, QUÍMICO, AUTOMOCIÓN Y PLÁSTICO DE LA COMUNIDAD VALENCIANA PARA EL EJERCICIO 2018”
El proyecto titulado PLAN DE COMPETITIVIDAD DE INSOCO S.L. (nº expediente INPYME/2018/338), con un presupuesto de 96.897,08€, ha recibido una subvención por parte de la Conselleria d’Economia Sostenible, Sectors Productius, Comerç i Treball, por un importe total de 33.913,98€.