Contact Adhesives Brush Application
Product Characteristics
ADHESIVO EX-PS Contact adhesive for bonding Expanded polystyrene (EPS).
ADHESIVO TL/NS Non stain contact adhesive with high yellowish resistance for general use on lampshade manufacture.
MONTAROL 260 F/NS Specially created for the bonding of very porous materials (textiles, board, foam, cork) to itself or to wood, metal, etc. Brochure application, two ways bonding, very long open time, fast drying time and high tack. Light coloured, minimum dirtying, very good brushability.
MONTAROL 260 ST Brushable contact adhesive with good tack and fast bond. For high to medium demand bonding.
Spaying Solvent Based Adhesives
Product Characteristics
CELLOPRENE P-2774 Used in all the applications that need a normal contact adhesive but that need to be applicate by spray, with good TACK and open-time, and also a good heat resistance.
Sprayable Adhesives for Upholstery
Product Characteristics
CEBEROL Contact adhesive on spray format 400ml with similar properties as SPRAY TR-85.
SPRAY 92 TACK Special for application to only one of the bonding surfaces, when pieces are not submit to high tensions. Extremely high TACK.
SPRAY ISOPLUS One or two bonding surfaces application. High solid content, good heat resistance up to temperatures of 60-80ºC. Low tack but good adhesion to plastics and difficult materials.
SPRAY NI ESPECIAL NON FLAMMABLE adhesive for polyurethane foam materials to wood, metal, textile etc. Two way application, very fast drying time, excellent sprayability, high TACK, good heat resistance, large open time, fast development of the bonding resistance.
SPRAY NI-100 NON FLAMMABLE and high solids content adhesive for polyurethane foam materials to wood, metal, textile etc. Two way application, very fast drying time, excellent sprayability, high TACK, good heat resistance, large open time, fast development of the bonding resistance.
SPRAY S-3 One or two bonding surfaces application. It reaches the requirements for the manufacture of seats for the Automotive Industry, such as heat resistance to temperatures of 60-80ºC.
SPRAY TR-85 For the bonding of polyurethane foam materials to itself and to wood, metal, textile, etc. Two way application, very fast drying time, excellent sprayability, high TACK, good heat resistance, large open time, fast development of the bonding resistance. Adhesives can be blue in order to make visually easier the gluing.
SPRAY TR-86 Winter formulation of SPRAY TR-85 with high tack and better behaviour under wet and cold environment.
Various
Product Characteristics
DESMOLDEANTE PUV Release agent designed to help the viscoelastic polyurethanes foams release process manufactured though a casting process. Given excellent results, preventing orange skins in the manufactured pieces, avoiding to get adhered in any place of the mould.
DISOLVENTE N For the cleaning of machines, spray-guns, brochures etc. that apply polychloroprene and synthetic rubber adhesives.
DISOLVENTE NI-3 Dilutor and cleaner for NON FLAMMABLE spray adhesives.
Water Base Adhesives (AQUATACK)
Product Characteristics
AQUATACK 100-BV Water based contact adhesive high speed of coagulation by pressure. Application by brush or roller
AQUATACK 4333-PT Polyurethane water base adhesive, similar to AQUATACK 3835/UV but use for bonding of cork/latex ( Bios ) insoles by spray application, with better hot-tack and lower activation temperature.
AQUATACK S-1K/1068 One component water based adhesive for the bonding of polyurethane foam materials to itself and to wood, metal, textile etc. on upholstery and mattress. No flammable and No toxic.